This rugged bare die offers increased power density, high operating temperature / reduced cooling requirement & improves system reliability. Higher speed switching is possible with lower conduction losses over temperature for increased efficiency.
Features:
- Capable of high temperature operation ≥ 175°C
- Rugged performance in smallest form factor
- Typ RDS(on) = 175mΩ at VGS=20V, ID=10A
- High Speed Switching with Low Capacitance
- Ease of Paralleling
- Resistant to Latch-up
- High Gate Resistance for Drives
Applications:
- High Temperature Electronics
- Industrial Motor Loads
- Wind Generation Inverter
- Solar Inverter
- EV battery chargers
- High voltage DC/DC converters
- UPS
- Switching Power Supplies
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 4mm² (6199.987mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 4mm² (6199.987mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Technology: Gen 2
Specification:
VDSS: 1,200V
VGS: -10/+25V
VGS(th)min: 2.0V
ID: 17A
EAS: n/a
RDS(ON): 175mΩ
RDS(on) @ Thigh: 300mΩ
Qg: 26nC
COSS: 35pF
QrrBody Diode: 40nC
trrBody Diode: 6ns
VGS: -10/+25V
VGS(th)min: 2.0V
ID: 17A
EAS: n/a
RDS(ON): 175mΩ
RDS(on) @ Thigh: 300mΩ
Qg: 26nC
COSS: 35pF
QrrBody Diode: 40nC
trrBody Diode: 6ns
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
