Back to List

Bare Die Product Detail: CPM3-1200-0021A

1200V:
1200 Volt 21mΩ Silicon Carbide (SiC) MOSFET specified at >=175°C maximum junction temperature. Metalized with Aluminum on topside for wirebonding and Gold on bottom side for hi-rel solder attach.

This rugged bare die offers increased power density, high operating temperature / reduced cooling requirement & improves system reliability. Higher speed switching is possible with lower conduction losses over temperature for increased efficiency.

Features:

Capable of high temperature operation >= 175°C
Typ R_DS(on) = 21mΩ at V_GS=15V, I_D=61A
High Speed Switching with Low Capacitance
Ease of Paralleling
Resistant to Latch-up
High Gate Resistance for Drives

Applications:

High Temperature Electronics
Industrial Motor Loads
Wind Generation Inverter
Solar Inverter
EV battery chargers
High voltage DC/DC converters
UPS
Switching Power Supplies

To request Die Physical Data please Contact Engineering.

Vendor:
Wolfspeed
Electrical Datasheet

Die Physical Data:
Footprint: 1mm² (1mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

1200V

Functional:

Technology: Gen 3

Specification:

V_DSS: 1,200V
V_GS: -8/+19V
V_GS(th)min: 1.8V
I_D: 100A
E_AS: n/a
R_DS(ON): 21mΩ
R_DS(on) @ ^T_high: 38mΩ
Q_g: 162nC
C_OSS: 180pF
Q_rr^{Body Diode}: 928nC
t_rr^{Body Diode}: 34ns

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.