-
Features:
- Cost effective high performance upgrade of equivalent Si MOSFET
- Much smaller form factor than Si or SiC for equivalent power density
- Very low gate charge
- Typ RDS(on) =5.5mΩ at VGD=5V, ID=16A
- Zero reverse recovery charge
- High Speed Switching with Low Capacitance
- Ease of Paralleling
- Resistant to Latch-up
Applications:
- Synchronous Rectification
- Class-D Audio
- High Frequency DC-DC conversion
- Communication Base Stations
- Motor Drivers
Recommended Drivers:
- Monolithic Power Systems - MP8699B
- uPI Semi - 1966e
- Monolithic Power Systems - MPQ1918
- Texas Instruments - LMG1205
Vendor:
Innoscience
Electrical Datasheet
Die Physical Data:
Footprint: 3.75mm² (5812.518mil²)
Request Pad Layout
Innoscience
Electrical Datasheet
Die Physical Data:
Footprint: 3.75mm² (5812.518mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Config: Single
- Supply Format: WLCSP
Specification:
VDS (Max): 100V
VGS: 5.5V
RDS(ON): 5.5mΩ
RDS(ON)MAX: 7.0mΩ
Qg: 4.50nC
Qgs: 1.00nC
Qgd: 0.80nC
QOSS: 25.00nC
ID: 29A
IDM: 125A
VGS: 5.5V
RDS(ON): 5.5mΩ
RDS(ON)MAX: 7.0mΩ
Qg: 4.50nC
Qgs: 1.00nC
Qgd: 0.80nC
QOSS: 25.00nC
ID: 29A
IDM: 125A
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
