Features:
- Features: 50/60 Hz Rejection, Excitation Current Sources (iDACs), GPIO, Oscillator, PGA, Temp Sensor
- Digital Supply (Min) (V): 2.7V
- Digital Supply (Max) (V): 5.25V
- Power Consumption (Typ) (mW): 2.3mW
- Applications: RTD/Thermistor, Thermocouple, Pressure Measurements
Vendor:
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 7.200mm² (11160mil²)
Request Pad Layout
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 7.200mm² (11160mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Bits: 24
- Interface: Serial SPI
- Input Channels: 8
- Architecture: Delta-Sigma
- Input Type: Differential, Single-Ended
- Reference Type: Ext, Int
- Sim Sampling: Yes
Specification:
AVDD (Min): 2.70V
AVDD (Max): 5.25V
SR(Max): 2,000SPS
VIN (MIN): -2.13V
VIN (MAX): 4.25V
AVDD (Max): 5.25V
SR(Max): 2,000SPS
VIN (MIN): -2.13V
VIN (MAX): 4.25V
Functional:
- Bits: 24
- Channels: 8
- Interface: SPI
- Architecture: Delta-Sigma
- Input Type: Diff, SE
- Sim Sampling: No
Specification:
PC(Max): 2.30mW
AVDD (Min): 2.70V
AVDD (Max): 5.25V
SNR: n/a
INL(Max): n/a
SR(Max): 2.000KSPS
SINAD: n/a
ADC VIN (Min): -2V
ADC VIN (Max): 4.250V
AVDD (Min): 2.70V
AVDD (Max): 5.25V
SNR: n/a
INL(Max): n/a
SR(Max): 2.000KSPS
SINAD: n/a
ADC VIN (Min): -2V
ADC VIN (Max): 4.250V
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
