Innovate > Integrate > Empower - Design at Die Level

Parametric Search

Use our parametric search tool to find the right component for your project, simply log in or register to access the search tool. 

More
  Back to List

Bare Die Product Detail: CD4049UB

Inverting Buffer/Driver:
The CD4049UB features logic level conversion using single supply voltage. Primary use is as CMOS to TTL/DTL converter driving up to X2 TTL/DTL loads. The device finds use where low power dissipation and/or high noise immunity is desired.
This bare die is well suited for use in high reliability circuits. It is a direct replacement for MOT / ON Semi MC14049UB, Texas Instruments (TI) CD4049UBH and obsolete Fairchild & National CD4049UB.
Features:
  • High Input Voltage up to 20V
  • Logic level conversion using only one supply voltage
  • Inputs allow voltages greater than VDD
  • High Source and Sink Current
  • x2 TTL load drive
  • Specified at 5V, 10V & 15V
  • Low Input Current:  1.0µA
  • High Noise Immunity Characteristic of CMOS Devices
  • Military Temperature Range for High Reliability
  • Comitted long term support with no die mask changes.

Applications:
  • CMOS to DTL or TTL Hex Converters
  • CMOS Current Sink or Source Drivers
  • CMOS High-to-Low Logic Level Converters
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 2.091mm² (3240.948mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • I/P Level: CMOS
  • O/P Level: CMOS
  • Bits: 6
  • 3-State O/P: No
  • Schmitt Trigger: No
Specification:
VCC (Min): 3.00V
VCC (Max): 18.00V
fMIN @ VNOM: 12MHz
tpd (Max) @ VNOM: 120.0ns
ICC (Max) @ VNOM: 0.0300mA
VNOM (Max): 5.0V
Output Drive (Max): 5.2mA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

LMV791:
17 MHz, Low Noise, CMOS Input, 1.8V Operational Amplifiers with Shutdown
SN74HC08:
Quadruple 2-Input Positive-AND Gates
SN74ACT86:
Quadruple 2-Input Exclusive-OR Gates
SN74LS374:
Octal D-Type Edge Triggered Flip-Flops with 3-State Outputs
AM26LV31E:
Low-Voltage High-Speed Quadruple Differential Line Driver With +/-15-kV IEC ESD Protection
PGA309:
PGA309 Voltage Output Programmable Sensor Conditioner