Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: TPS61090

Step-Up (Boost) Converter:
2A Switch, 96% Efficient Boost Converter
Features:
  • Features:  Enable, Frequency Synchronization, Light Load Efficiency, Load Disconnect, Power Good
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 4.387mm² (6800mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Regulated Outputs: 1
Specification:
f(MAX): 700kHz
Frequency (MAX): 500kHz
IQ: 0.020mA
VIN (MIN): 1.8V
VIN (MAX): 5.5V
VOUT (MAX): 5.5V
VOUT (MIN): 1.8V
Duty Cycle(Max): 100%
ILIM(Switch): 2.00A
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

TL082:
JFET-Input Operational Amplifier
TLC2262:
Dual Advanced LinCMOS(TM) Rail-To-Rail Operational Amplifier
SN74ACT04:
Hex Inverters
SN74HC08:
Quadruple 2-Input Positive-AND Gates
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.