Bare Die Product Detail: IS61WV51216EDBLL

Low Power SRAM:
8M High-Speed Low-Power Aynchronous SRAM bare die with on-chip ECC configured as 512K x 16

This bare die is well suited for integration into high density MCP (Multi-Chip-Package), MCM (Multi-Chip-Module) & SiP (System-In-Package) solutions. Supported by the highest quality KGD test flow, wafers deliver high reliability and superior yield.

Features:

Error detection and error correction

Independent ECC for each byte
Detect and correct one bit error per byte
Better reliability than parity code schemes

High-speed access time: 8,10 ns
High-performance, low power CMOS process
Multiple center power and ground pins for greater noise immunity
Easy memory expansion with /CE and /OE options
/CE power-down
Fully static operation: no clock or refresh required
TTL compatible inputs and outputs
Data control for upper and lower bytes
Committed long term support with very low obsolescence or mask change rate.

To request Die Physical Data please Contact Engineering.

Vendor:
ISSI
Electrical Datasheet

Die Physical Data:
Footprint: 1mm² (1mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Low Power SRAM
High Speed SRAM

Functional:

Density: 8M
Memory Cell: 6T
ECC: Yes

Specification:

Organisation: V_{CC (Min)}: 2.40V
V_{CC (Max)}: 3.60V
Speed: 8,10ns
I_SB: 2.000mA
I_SB(Max): 15.000mA
I_CC: 15mA
I_{CC (Max)} @ V_NOM: 55mA

Functional:

Density: 8M
Memory Cell: 6T
ECC: Yes

Specification:

Organisation: V_{CC (Min)}: 2.40V
V_{CC (Max)}: 3.60V
Speed: 8,10ns
I_{CC (Max)} @ V_NOM: 65mA
I_SB(CMOS): 2.0mA
I_SB(TTL): 25mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.