Back to List

Bare Die Product Detail: S6R4016C1A

High Speed SRAM:
4,194,304-bit high-speed SRAM organized as 256k words by 16 bits.The device uses 16 common i/o lines & an output enable pin operating faster than address access time at read cycle. Lower/upper byte access is set by data byte control (NOT UB, NOT LB).

This 5 Volt 4M SRAM bare die is produced using a Hi-Rel 6T transistor memory cell & directly replaces the obsolete Samsung K6R4016C1 series. With long term support this die is an ideal replacement for legacy programs & for high reliability designs.

Features:

Fast Access Time: 8, 10, 12, 15ns(Max)
Data Byte Control Mode LB : I/O0~ I/O7, UB : I/O8~ I/O15
TTL Compatible Inputs and Outputs
Fully Static Operation, no Clock or Refresh required
Three State Outputs

Vendor:
Netsol
Electrical Datasheet

Die Physical Data:
Footprint: 6.002mm² (9303.283mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

High Speed SRAM

Functional:

Density: 4M
Memory Cell: 6T
ECC: No

Specification:

Organisation: V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
Speed: 8,10,12,15ns
I_{CC (Max)} @ V_NOM: 30mA
I_SB(CMOS): 6.0mA
I_SB(TTL): 10mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.