Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: GD100MPS12-CAL

1200V:
1200 Volt 100 Amp Silicon Carbide (SiC) Rectifier Diodes specified at >=175°C maximum junction temperature. Metalized with Aluminum on topside for wirebonding and Silver on bottom side for solder attach.
This rugged bare die provides scope for increased power density, higher operating temperature / reduced cooling requirement for improved system reliability. The zero reverse recovery current of the Schottky structure enables high speed switching.
Features:
  • Capable of high temperature operation >= 175°C
  • High Surge Current Capacity
  • Positive Temperature Coefficient
  • Ease of Paralleling
  • No Reverse Recovery / No Forward Recovery

Applications:

  • High Temperature Electronics
  • Industrial Motor Loads
  • Wind Generation Inverter
  • Solar Inverter
  • UPS
  • Switching Power Supplies

To request Die Physical Data please Contact Engineering.
Vendor:
GeneSiC
  Electrical Datasheet

Die Physical Data:
Footprint: 1mm² (1mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Technology: Gen 4
Specification:
VRRM: 1,200V
IF: 100A
IFSM: 600A
EAS: 901mJ
VF @ IF: 1.50V
VF @ IF Thigh: 1.90V
Qc: 322nC
IR(MAX) @ VR 25°C: 50µA
IR(MAX) @ VR Thigh:   n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74HC08:
Quadruple 2-Input Positive-AND Gates
SN74LS74A:
Dual D-type pos.-edge-triggered flip-flops with preset and clear
CD4094B:
CMOS 8-Stage Shift-and-Store Bus Register
UC2637:
Switched Mode Controller for DC Motor Drive
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.