Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: SIGC144T170R2C

1700V IGBT:
IGBT Bare Die in NPT technology. Infineon IGBT 2 Low Loss family is a non punch-through IGBT technology with low switching losses and high robustness.
Features:
  • 1700V NPT technology
  • 280µm thickness
  • Short circuit rated
  • Positive temperature coefficient
  • Easy paralleling

Applications:

  • Motor & Control Drives
Vendor:
Infineon
  Electrical Datasheet

Die Physical Data:
Footprint: 143.520mm² (222457.312mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Status: NRND
  • Technology: NPT
  • TJ(MAX): 150°C
  • Short Circuit Rated: Yes
  • Integral Gate Resistor: No
Specification:
VCE(Max): 1,700V
IC(Max): 75A
VCEsat(Max): 3.20V
VGEth(Min): 4.5V
VGEth(Max): 6.5V
tr: 0.1ns
tf: 0.03ns
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

TL072:
Dual Low-Noise JFET-Input General-Purpose Operational Amplifier
CD74HC14:
High Speed CMOS Logic Hex Schmitt-Triggered Inverters
SN74LS10:
Triple 3-input positive-NAND gates
CD74HC74:
High Speed CMOS Logic Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.