These bare die are metalized with Aluminium top side for wirebonding and Titanium-Nickel-Silver (TiNiAg) back side for solder attach for use in high integration and high reliability applications.
Features:
- High DC Current Gain: hFE = 4750 (Typ) @ IC = 2A
- Collector-Emitter Sustaining Voltage: VCEO(sus) = 60V (min) @ 30 mA
- Low collector-emitter saturation voltage:
- VCE(sat) = 2V (Max) @ IC =2A
- VCE(sat) = 3V (Max) @ IC =4A
- Built-in Base-Emitter shunt resistor.
Applications:
- General purpose linear and switching of large currents
- Enabling high impedance circuitry.
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 5.774mm² (8949.741mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 5.774mm² (8949.741mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- N/A
Specification:
V(BR)CEO, VCES: 60V
IC(Max): 4.0A
hFE1(Min): 750
hFE1(Max): 15,000
hFE1 @ IC: 2,000mA
hFE2(Min): 100
hFE2 @ IC: 4,000mA
VCE(sat)1(Max): 2.0V
VCE(sat)1 IC/IB: 2/8A/mA
VCE(sat)2(Max): 3.0V
VCE(sat)2 IC/IB: 4/40A/mA
fT(Typ): 25MHz
IC(Max): 4.0A
hFE1(Min): 750
hFE1(Max): 15,000
hFE1 @ IC: 2,000mA
hFE2(Min): 100
hFE2 @ IC: 4,000mA
VCE(sat)1(Max): 2.0V
VCE(sat)1 IC/IB: 2/8A/mA
VCE(sat)2(Max): 3.0V
VCE(sat)2 IC/IB: 4/40A/mA
fT(Typ): 25MHz
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
