- Antenna Connection: Single Ended
- Frequency(Min): 2400MHzMHz
- Frequency(Max): 2483.5MHzMHz
- WAKE-ON-RADIO: No
- AES 128bit hardware encryption: No
- Bluetooth Low Energy: Yes
- WIRELESSHART: Yes
- WIRELESS M-BUS: No
- ZIGBEE: Yes
- ZigBee RF4CE: Yes
- 6LoWPAN: Yes
- KNX-RF: No
- SP100: Yes
- SIMPLICITI: Yes
- USB 20: No
- IEEE 802154 Compliant: Yes
- Complies with EN 300 220 and FCC CFR 47 Part 15: No
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 1.881mm² (2915mil²)
Request Pad Layout
- Type: Range Extender
- Freq range: 2.4GHz
- Modulation Tech: -
VS (Max): 3.6V
Datarate (Max): n/a
ISB: 0.1µA
Flash: 1KB
PA Efficiency: n/a
Prog Output Power: -dBm
RAM: 0KB
IRX (Low): 3.4mA
Sensitivity(Best): n/a
TX Power(Max): 22dBm
Wake PD-->RX/TX: 1µs
- Type: Range Extender
- Freq range: 2.4GHz
VS (Max): 3.6V
f(MAX): 2,483.5MHz
Frequency (MAX): 2,400MHz
ISB: 0.1µA
IRX (Low): 3.4mA
TX Power(Max): 22dBm
Wake PD-->RX/TX: 1µs
- Type: Range Extender
- Freq range: 2.4GHz
- Modulation Tech: -
VS (Max): 3.6V
Datarate (Max): n/a
ISB: 0.1µA
Flash: 1KB
PA Efficiency: n/a
Prog Output Power: -dBm
RAM: 0KB
IRX (Low): 3.4mA
Sensitivity(Best): n/a
TX Power(Max): 22dBm
Wake PD-->RX/TX: 1µs
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.