Bare Die Product Detail: CC2543

2.4 GHz Wireless IC:
2.4GHz RF Value Line SoC with 32kB flash, 16 GPIO, I2C, SPI and UART

Features:

Features: 16 gpio, ADC, SPI, UART, I2C
Antenna Connection: Differential
Frequency(Min): 2379MHzMHz
Frequency(Max): 2496MHzMHz
WAKE-ON-RADIO: No
AES 128bit hardware encryption: No
Bluetooth Low Energy: No
WIRELESSHART: No
WIRELESS M-BUS: No
ZIGBEE: No
ZigBee RF4CE: No
6LoWPAN: No
KNX-RF: No
SP100: No
SIMPLICITI: No
USB 20: No
IEEE 802154 Compliant: No
Complies with EN 300 220 and FCC CFR 47 Part 15: No

Vendor:
Texas Instruments
Electrical Datasheet

Die Physical Data:
Footprint: 9.136mm² (14161mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

2.4 GHz Wireless IC
Wireless MCU

Functional:

Type: Wireless MCU
Freq range: 2.4GHz
Modulation Tech: GFSK, MSK

Specification:

V_{S (Min)}: 2.0V
V_{S (Max)}: 3.6V
Datarate _(Max): 2,000kbps
I_SB: 0.4µA
Flash: 4KB
PA Efficiency: n/a
Prog Output Power: -20 to 5dBm
RAM: 1KB
I_{RX (Low)}: 21.2mA
Sensitivity(Best): -98dBm
TX Power_(Max): 5dBm
Wake PD-->RX/TX: 180µs

Functional:

Type: Wireless MCU
GPIO: 8
Freq range: 2.4GHz
I2C: 2
I2S: 1
Modulation Tech: GFSK, MSK
SPI: 1
TMR 16-bit: 1
TMR 8-bit: 2
UART: 1

Specification:

V_{S (Min)}: 2.0V
V_{S (Max)}: 3.6V
Datarate _(Max): 2,000kbps
I_SB: 0.4µA
ADC: Flash: 4KB
RAM: 1KB
I_{RX (Low)}: 21.2mA
Sensitivity(Best): -98dBm
TX Power_(Max): 5dBm

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.