This part directly replaces legacy National Semiconductor (NSC) / Texas Instruments (TI) LM335 MWC OR LM335 MDC and ST Micro LM335
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- Temperature range: -40 to +100°C
- 2% calibrated accuracy at 25°C
- Single-point calibration for high precision
- Operates from 400µA to 5mA
- <1Ω dynamic impedance
- Linear output
- Small size for high integration
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.575mm² (2441.258mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 1.575mm² (2441.258mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Interface: Analog
- Shutdown: No
Specification:
Temp Range: -40 to 100°C
Local Accuracy(Max): 2.0±°C
VS (Min): 3.0V
VS (Max): 5.0V
IQ (Max): 450µA
Sensor Gain: 10.00mV/°C
Local Accuracy(Max): 2.0±°C
VS (Min): 3.0V
VS (Max): 5.0V
IQ (Max): 450µA
Sensor Gain: 10.00mV/°C
Functional:
- Interface: Analog
- Shutdown: No
Specification:
Temp Range: -40 to 100°C
VS (Min): 3.00V
VS (Max): 5.00V
Local Accuracy(Max): 2.0±°C
Sensor Gain: 10.00mV/°C
IQ (Max): 450µA
Z(O): 0.6Ω
VS (Min): 3.00V
VS (Max): 5.00V
Local Accuracy(Max): 2.0±°C
Sensor Gain: 10.00mV/°C
IQ (Max): 450µA
Z(O): 0.6Ω
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
