Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: LM135

Analog Temperature Sensor:
The LM135 linear-output temperature sensor operates over a wide -55°C to 200°C temperature range and can be specifically calibrated for the application. The small size, low impedance and linear output of the device enables simple circuit integration.
This part directly replaces legacy National Semiconductor (NSC) / Texas Instruments (TI) LM135 MD8 OR LM135 MW8 and ST Micro LM135
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
  • Temperature range: -55 to +200°C
  • 1.5% calibrated accuracy at 25°C
  • Single-point calibration for high precision
  • Operates from 400µA to 5mA
  • <1Ω dynamic impedance
  • Linear output
  • Small size for high integration
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 1.575mm² (2441.258mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Interface: Analog
  • Shutdown: No
Specification:
Temp Range: -55 to 200°C
Local Accuracy(Max): 1.5±°C
VS (Min): 3.0V
VS (Max): 5.0V
IQ (Max): 450µA
Sensor Gain: 10.00mV/°C
Functional:
  • Interface: Analog
  • Shutdown: No
Specification:
Temp Range: -55 to 200°C
VS (Min): 3.00V
VS (Max): 5.00V
Local Accuracy(Max): 1.5±°C
Sensor Gain: 10.00mV/°C
IQ (Max): 450µA
Z(O): 0.6Ω
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

TL062:
Dual Low-Power JFET-Input General-Purpose Operational Amplifier
TL064:
Quad Low-Power JFET-Input General-Purpose Operational Amplifier
CD74HC14:
High Speed CMOS Logic Hex Schmitt-Triggered Inverters
SN74ACT00:
Quadruple 2-Input Positive-NAND Gates
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.