Back to List

Bare Die Product Detail: SiS5219A

Regulator output > 300mA:
SiS4219A suits start-up conditions with high inrush current demand up to 1A. Output is set by x2 external resistors & enabled or shut down by CMOS/TTL signals. Low dropout voltage, low ground current & ultra-low noise parameters enable performance.

This bare die is an upgrade of the Micrel / Microchip MIC5219 featuring wider voltage range, higher output current, lower voltage dropout & lower ground current. On-chip enable / shutdown & rugged protection features further enhance this device.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Wide V_IN 2.4V - 16V
Low dropout voltage:

<330mV (I_OUT = 500mA)
<550mV (I_OUT = 1A)

0.003% Line, 0.2% Load regulation (Typ)
Low ground current: <13mA (I_OUT = 500mA)
Low standard output noise: 500nv/√Hz
Ultra-Low output noise option: 300nv/√Hz with C_BYPASS
CMOS/TTL-Compatible Enable/Shutdown Control
Near-Zero Shutdown Current
Current + thermal limiting + rev. polarity protection
Low temperature coefficient

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 2.220mm² (3441.010mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Regulator output > 300mA

Functional:

Output: Adjustable Output
Output Capacitor: Cap Free, Ceramic

Specification:

V_{IN (MIN)}: 2.40V
V_{IN (MAX)}: 16.00V
I_{OUT (MAX)}: 1.00A
V_{OUT (MIN)}: 1.24V
V_{OUT (MAX)}: 16.00V
V_DO: 250mV
Accuracy: 1.00%
I_Q: 0.080mA
Noise Figure: n/a
PSRR @ 100KHz: 60dB

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.