Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: TPS61202

Step-Up (Boost) Converter:
0.3V Input Voltage Boost Converter with 1.3A Switches and "Down Mode" in a 3x3 QFN
Features:
  • Features:  Enable, Light Load Efficiency, Load Disconnect, Power Good, UVLO Adjustable
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 3.942mm² (6110mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Regulated Outputs: 1
Specification:
f(MAX): 1,650kHz
Frequency (MAX): 1,250kHz
IQ: 0.050mA
VIN (MIN): 0.3V
VIN (MAX): 5.5V
VOUT (MAX): 5.0V
VOUT (MIN): 5.0V
Duty Cycle(Max): 95%
ILIM(Switch): 1.35A
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74LS11:
Triple 3-input positive-AND gates
SN74LS86A:
Quad 2-input exclusive-OR gates
SN75240:
Dual USB Port Transient Suppressor
LT1004-2.5:
Micropower Integrated Precision Voltage Reference
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.