Back to List

Bare Die Product Detail: S1C17121

Ultra-Low Power MCU+LCD Driver:
The S1C17121 is a low power 16-Bit Flash based MCU integrating multiple serial interfaces, timers and LCD driver. An integrated RF converter and 10-Bit ADC further broaden the application scope permitting multiple analog sensors to be connected.

This bare die suits use in highly integrated sensor driven health care products, wearables and meter modules. It's power efficiency, small-scale and flexible interfacing provide ease of implementation.

Features:

LCD Driver:
- 36 SEG x 8 COM
- 40 SEG x 4 COM (1/3 bias)
32kB ROM, 2kB RAM, 40B Display RAM
x3 clock generation sources
x36 GPIO
x2 8-Bit Timers, x3 16-Bit Timers, x1 16-Bit PWM Timer, Watchdog Timer, Clock Timer, 8-Bit OSC PWM Timer
Supply-Voltage detector
Multiple serial interfaces: x2 UART, x1 SPI, x2 I²C, Remote controller (RMEC)
10-Bit SAR ADC
RF converter
Multiple reset & interrupt protocols
Very small form factor capable of ultra-thin height profile

Power Consumption:

SLEEP Mode:

0.15µA (OSC1=OFF, IOSC=OFF, OSC3=OFF)

HALT Mode:
- 0.9µA (OSC1=32kHz, IOSC=OFF, OSC3=OFF, PCKEN=0x0, LCD OFF)
- 1.9µA (OSC1=32kHz, IOSC=OFF, OSC3=OFF, PCKEN=0x0, LCD ON (All LCD On, maximum contrast, VC2 standard))
RUN Mode:
- 7µA (OSC1=32kHz, IOSC=OFF, OSC3=OFF, LCD OFF)
- 250µA (OSC1=OFF, IOSC=OFF, OSC3=1MHz ceramic oscillator)

Applications:

Low power & high integration display systems
Battery driven controllers
Wearable products
Remote Sensors
MCM, MCP and SiP integration

Vendor:
Epson
Electrical Datasheet

Die Physical Data:
Footprint: 11.902mm² (18448.912mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Ultra-Low Power MCU+LCD Driver

Functional:

I2C: 1
SPI: 1
UART: 2
DMA: -Ch
Comp Inputs: n/a
TMR 16-bit: 3
TMR 32-bit: n/a
GPIO: 36

Specification:

LCD Seg.: 288
ADC: f_(MAX): 4.2MHz
NVM: 32KB
RAM: 2KB
V_{CC (Min)}: 1.8V
V_{CC (Max)}: 3.6V
Active Power: 250µA/MHz
S/B Pwr (LPM/HALT): 0.90µA
Sleep Pwr: 0.15µA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.