This bare die is well suited for integration into high density MCP (Multi-Chip-Package), MCM (Multi-Chip-Module) & SiP (System-In-Package) solutions. Supported by the highest quality KGD test flow, wafers deliver high reliability and superior yield.
Features:
- JEDEC standard 1.8V power supply
- Auto refresh and self refresh
- Programmable Burst Length and Burst Type:
- 1, 2, 4, 8 or Full Page for Sequential Burst
- 4 or 8 for Interleave Burst
- Programmable CAS Latency : 2,3 clocks
- All inputs and outputs referenced to the positive edge of the system clock
- Data mask function by DQM
- Internal dual banks operation
- Burst Read Single Write operation
- 64ms refresh period (4K cycle)
- Special Function Support:
- PASR (Partial Array Self Refresh)
- Auto TCSR (Temperature Compensated Self Refresh)
- Deep Power Down Mode
- Programmable Driver Strength Control by Full Strength or 3/4, 1/2, 1/4, 1/8 of Full Strength
- Automatic precharge, includes CONCURRENT Auto Precharge Mode and controlled Precharge
- LVCMOS compatible inputs/outputs
- Operation Temperature -40°C to 105°C
- Committed long term support with very low obsolescence or mask change rate.
Product Families: Used for this device are tabulated below.
Functional:
- Density: 4.256Mb
Specification:
Depth: 8Mb
Width: VS: 1.8V
Refresh: 4K
Speed: 166, 133MHz
Width: VS: 1.8V
Refresh: 4K
Speed: 166, 133MHz
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
