Bare Die Product Detail: IS25LP064D

Serial NOR:
64Mb Serial Flash Memory Bare Die With 166MHz Multi I/O SPI & Quad I/O QPI DTR Interface

This bare die is well suited for integration into high density MCP (Multi-Chip-Package), MCM (Multi-Chip-Module) & SiP (System-In-Package) solutions. Supported by the highest quality KGD test flow, wafers deliver high reliability and superior yield.

Features:

Single Power Supply Operation
Cost Effective Sector/Block Architecture
Low standby current 1µA (Typ)
Serial Peripheral Interface (SPI) Compatible
Page Program (up to 256 Bytes) Operation
Sector, Block or Chip Erase Operation
Low Power Consumption
Hardware/Software Write Protection
Superior Endurance: Min 20 years after 100K cycles
Committed long term support with very low obsolescence or mask change rate.

To request Die Physical Data please Contact Engineering.

Vendor:
ISSI
Electrical Datasheet

Die Physical Data:
Footprint: 1mm² (1mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Serial NOR

Functional:

Density: 64M
Type: Multi I/O SPI, QPI, DTR
ECC: No

Specification:

Op Voltage: 2.3-3.6V
Freq: 80M/166Mhz
Temp Range: -40 to 105°C

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.