Back to List

Bare Die Product Detail: S6L1016W

Low Power SRAM:
1,048,576-bit high-speed SRAM organized as 64K words by 16 bits. Designed for low power, these devices are well suited for battery back up and low data retention current requirements. Lower/upper byte access is set by data byte control select.

This low V_CC 1M SRAM bare die is produced using a Hi-Rel 6T transistor memory cell. With long term support this die is an ideal replacement for legacy programs & for new designs requiring low power with high reliability.

Features:

Fast Access Time: 45, 55, 70ns(Max)
CMOS Low Power Dissipation
Wide range of Power Supply
Data Byte Control Mode LB : I/O0~ I/O7, UB : I/O8~ I/O15
Fully Static Operation, no Clock or Refresh required
Three State Outputs

Vendor:
Netsol
Electrical Datasheet

Die Physical Data:
Footprint: 6.354mm² (9849.428mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Low Power SRAM

Functional:

Density: 2M
Memory Cell: 6T
ECC: No

Specification:

Organisation: V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
Speed: 45,55,70ns
I_SB: 0.002mA
I_SB(Max): 0.010mA
I_CC: 4mA
I_{CC (Max)} @ V_NOM: 20mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.