Bare Die Product Detail: IS62C1024AL

Low Power SRAM:
1M Low Power Asynchronous SRAM bare die configured as 128K x 8

This bare die is well suited for integration into high density MCP (Multi-Chip-Package), MCM (Multi-Chip-Module) & SiP (System-In-Package) solutions. Supported by the highest quality KGD test flow, wafers deliver high reliability and superior yield.

Features:

High-speed access time: 8, 10 ns
Automatic power-down when chip is deselected
CMOS low power operation

20 µW (typical) CMOS standby
100 mW (typical) operating

Fully static operation: no clock or refresh required
Three-state outputs
Committed long term support with very low obsolescence or mask change rate.

To request Die Physical Data please Contact Engineering.

Vendor:
ISSI
Electrical Datasheet

Die Physical Data:
Footprint: 1mm² (1mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Low Power SRAM
High Speed SRAM

Functional:

Density: 1M
Memory Cell: 6T
ECC: No

Specification:

Organisation: V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
Speed: 35,45ns
I_SB: 0.004mA
I_SB(Max): 0.010mA
I_CC: 20mA
I_{CC (Max)} @ V_NOM: 40mA

Functional:

Density: 1M
Memory Cell: 6T
ECC: No

Specification:

Organisation: V_{CC (Min)}: 4.50V
V_{CC (Max)}: 5.50V
Speed: 35,45ns
I_{CC (Max)} @ V_NOM: 40mA
I_SB(CMOS): 4.0mA
I_SB(TTL): 2mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.