Back to List

Bare Die Product Detail: LM339A

Comparator:
x4 independent voltage comparators with 2mV max offset voltage. Wide Input Voltage range with common mode input including ground in Single & Split supply operation. Supply current drain is independent of supply voltage for lower power consumption.

This quad low power low offset voltage comparator is a direct replacement for the National Semiconductor (NSC), Texas Instruments (TI), Fairchild Semiconductor, Motorola, ST Micro and Philips (NXP) LM339A. Also replaces Intersil/RCA/Harris CA339A.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Wide Supply Range 2-36V
Low Input Offset Voltage 2mV maximum
Common mode input voltage includes ground
Very low supply current independent of supply voltage (1 mW/comparator at +5V)
Very Low Input Offset Current
TTL, DTL, ECL, MOS, CMOS compatible outputs
High Reliability tested grades

Applications:

Level Detection
Low-level Sensing
A/D conversion
VCOs
MOS Clock Generators
High Voltage Logic Gates
Multivibrators

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.016mm² (1574.904mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Comparator

Functional:

Channels: 4

Specification:

Rail - Rail: Output: V_{S (Min)}: 2.00V
V_{S (Max)}: 36.00V
t_PLH: 0.3000µs
V_{OS (Max)}: 2.0mV
I_{IB (Max)}: 250.00000nA
I_{Q (Max)} per Channel: 0.5000mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.