Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: SN65C3232E

RS-232 Interface IC:
3-V To 5.5-V Two Channel RS-232 1 Mbit/s Line Driver/Receiver with +/-15 kV IEC ESD Protection
Features:
  • IEC-61000-4-2 :  Yes
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 6.452mm² (10000mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Features: -
Specification:
ICC (Max) @ VNOM: 1mA
Datarate (Max): 1,000kbps
VS: 3.3, 5V
Drivers: 2ESD HBM: 15kV
Logic Voltage(Min): 3.30V
Rx: 2
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74HC244:
Octal Buffers And Line Drivers With 3-State Outputs
SN74HC86:
Quadruple 2-Input Exclusive-OR Gates
TL431:
Adjustable Precision Shunt Regulator
UC2637:
Switched Mode Controller for DC Motor Drive
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.