Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: BAS21

Switching:
High voltage optimized small-signal diode supplied in bare die form and intended for use in small-form factor high integration switch applications such as polarity portection, high frequency DC/DC converters or free wheeling.
Optimized for high voltage, this bare die is suited for use in high reliability hybrid circuitry and multiple-chip-modules (MCM) that require small form factor and hi-rel switching performance.
Features:
  • Very small form factor
  • High voltage capability
  • High temperature capability with no package limitation
  • Low conduction losses
  • Negligible switching losses
  • Low forward voltage drop
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.168mm² (260.556mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
    N/A
Specification:
VRRM: 275V
IF: 400mA
IFSM: 4.0A
IR(MAX) @ VR 25°C: 0.10µA
IR @ VR: 200V
IR(MAX) @ VR Thigh: 100µA
VF @ IF: 1.000V
IF @ VF: 100mA
VF @ IF2: 1.25V
IF2 @ VF: 200mA
trr 25°C: 50ns
CT(Max): 5pF
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

TL062:
Dual Low-Power JFET-Input General-Purpose Operational Amplifier
SN74HCT244:
Octal Buffers And Line Drivers With 3-State Outputs
SN74LS74A:
Dual D-type pos.-edge-triggered flip-flops with preset and clear
SN74LS85:
4-bit magnitude comparators
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.