Back to List

Bare Die Product Detail: LM358

Precision Amplifier:
Two independent, high gain, frequency compensated amplifiers operating from single 3V-32V or split supplies. Supply current per amp is approximately 1/5th of industry 741. Supply current drain is independent of voltage in split-supply operation.

Commercial die designed for smallest size and lower cost. Directly replaces legacy National LM358 MDA OR MWA, Motorola / ON Semi LM358, ST Micro LM358 and Texas Instruments LM358. Is an improved replacement for National LM2904 MDA.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Temperature compensated bandwidth (unity gain)
Temperature compensated I_B: 45nA
Wide power supply range, single supply: 3V-32V or dual supplies: ±1.5V to ±16V
Low V_OS: 2mV, and I_OS: 5nA
Differential input voltage range equal to the power supply voltage
Large output voltage: 0V to V_CC -1.5V swing
Input Common-Mode Voltage range includes ground

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 0.605mm² (937.443mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Functional:

Channels: 2
Shutdown: No

Specification:

CMRR _(Typ): 85dB
Gain BW: 0.7000MHz
I_{IB (Max)}: 250,000.00pA
V_{OS (Max)}: 7.000mV
I_O: 30.0mA
I_Q per Channel: 0.25000mA
Rail - Rail: Slew Rate: 0.3000V/µs
V_{S (Max)}: 32.00V
V_{S (Min)}: 3.00V
V_N: 40.0nV√Hz
V_OS Drift: 7.000µV/°C

Functional:

Channels: 2

Specification:

CMRR _(Typ): 85dB
Gain BW: 0.700MHz
I_{IB (Max)}: 250.00000nA
V_{OS (Max)}: 7.000mV
I_O: 30.0mA
I_Q per Channel: 0.2500mA
Rail - Rail: Slew Rate: 0.30V/µs
V_{S (Max)}: 32.00V
V_{S (Min)}: 3.00V
V_N: 40.0nV√Hz
V_OS Drift: 7.0µV/°C

Functional:

Channels: 2
Shutdown: No

Specification:

Rail - Rail: V_{S (Min)}: 3.00V
V_{S (Max)}: 32.00V
Gain BW: 0.700MHz
Slew Rate: 0.30V/µs
V_{OS (Max)}: 7.000mV
V_OS Drift: 7.000µV/°C
I_{IB (Max)}: 250.00000nA
V_N: 40.0nV√Hz
I_Q per Channel: 0.250mA
I_O: 30.0mA
CMRR _(Typ): 85dB

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.