This rugged bare die offers maximized power density, high operating temperature / reduced cooling requirement & improves system reliability. Higher speed switching is possible with lower conduction losses over temperature for increased efficiency.
Features:
- Cost effective high performance upgrade of equivalent Si MOSFET
- Much smaller form factor than Si or SiC for equivalent power density
- Capable of high temperature operation >150°C
- Typ RDS(on) =1600mΩ at VGS=6V, ID=0.3A
- High Speed Switching with Low Capacitance
- Ease of Paralleling
- Resistant to Latch-up
Applications:
- High Temperature Electronics
- Industrial Motor Loads
- DCM/BCM PFC
- AHB/QR Flyback/ACF DC-DC converter
- LED driver
- Fast battery chargers
Recommended Drivers:
- Joulwatt JW1515H (QR)
- Southchip SC3021C (QR)
- Meraki MK2697G (QR)
- Texas Instruments UCC28056 (PFC)
- NXP TEA2017AT (PFC+LLC)
- MPS HR1211 (PFC+LLC)
- Heyday HEY1011
Vendor:
Innoscience
Electrical Datasheet
Die Physical Data:
Footprint: 0.532mm² (824.603mil²)
Request Pad Layout
Innoscience
Electrical Datasheet
Die Physical Data:
Footprint: 0.532mm² (824.603mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Supply Format: Die
Specification:
VDS (Max): 650V
VGS: 7V
RDS(ON): 1,600mΩ
RDS(ON)MAX: 2,200mΩ
Qg: 0.20nC
Qgs: 0.04nC
Qgd: n/a
QOSS: 2.00nC
ID: 0.8A
IDM: 1.6A
VGS: 7V
RDS(ON): 1,600mΩ
RDS(ON)MAX: 2,200mΩ
Qg: 0.20nC
Qgs: 0.04nC
Qgd: n/a
QOSS: 2.00nC
ID: 0.8A
IDM: 1.6A
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
