This device suits applications that need high linearity & stability across a wide temperature range and with low power consumption. It is a candidate replacement for Texas Instruments OPA333 ((TI) where die form availabilty is a requirement.
Features:
- High impedance inputs
- Input Bias Current: 130pA (Typical)
- Low Offset Voltage: 25µV (Maximum)
- Zero Drift: 0.05 µV/°C
- Low Power Consumption: 120µA (Typical)
- Rail-To-Rail Input / Output
- Slew Rate: 0.25V/µs (Typical)
- Single or Dual Supply: 1.8V-5.5V (±0.9V to ±2.75V)
- Input Referred Noise: 2nV/vHz (Typical)
- High precision over wide temperature range
- Smallest form factor
Applications:
- Transducers
- Temperature Sensors
- Pressure Sensors
- Precision Current Sensing
- Strain Gauge Amplifiers
- ADC Drivers
- Battery Powered Devices
- Miniaturised Portable Equipment
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.724mm² (1121.893mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 0.724mm² (1121.893mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Channels: 1
- Shutdown: No
Specification:
Rail - Rail: VS (Min): 1.80V
VS (Max): 5.50V
Gain BW: 0.35MHz
Slew Rate: 0.25V/µs
VOS (Max): 0.025mV
VOS Drift: 0.02µV/°C
IIB (Max): 200pA
IQ per Channel: 0.120mA
IO: 32mA
VN: 2.0nV√Hz
CMRR (Typ): 100dB
VS (Max): 5.50V
Gain BW: 0.35MHz
Slew Rate: 0.25V/µs
VOS (Max): 0.025mV
VOS Drift: 0.02µV/°C
IIB (Max): 200pA
IQ per Channel: 0.120mA
IO: 32mA
VN: 2.0nV√Hz
CMRR (Typ): 100dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
