Features:
- Programmable Output Power Ranging From(dBm): -20 to 10dBm
- Frequency(Min): 300MHzMHz
- Frequency(Max): 1000MHzMHz
- WAKE-ON-RADIO: No
- AES 128bit hardware encryption: No
- Bluetooth Low Energy: No
- WIRELESSHART: No
- WIRELESS M-BUS: No
- ZIGBEE: No
- ZigBee RF4CE: No
- 6LoWPAN: No
- KNX-RF: No
- SP100: No
- SIMPLICITI: No
- USB 20: No
- IEEE 802154 Compliant: No
- Complies with EN 300 220 and FCC CFR 47 Part 15: Yes
Vendor:
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 9.703mm² (15040mil²)
Request Pad Layout
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 9.703mm² (15040mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Type: Smart RF Transceiver
- GPIO: n/a
- Freq range: Sub 1-GHz
- I2C: 1
- I2S: 1
- Modulation Tech: FSK, OOK
- SPI: 1
- TMR 16-bit: 1
- TMR 8-bit: 1
- UART: 1
Specification:
VS (Min): 2.1V
VS (Max): 3.6V
Datarate (Max): 76.8kbps
ISB: 0.2µA
ADC: Flash: 1KB
RAM: 0KB
IRX (Low): 7.4mA
Sensitivity(Best): -110dBm
TX Power(Max): 10dBm
VS (Max): 3.6V
Datarate (Max): 76.8kbps
ISB: 0.2µA
ADC: Flash: 1KB
RAM: 0KB
IRX (Low): 7.4mA
Sensitivity(Best): -110dBm
TX Power(Max): 10dBm
Functional:
- Type: Smart RF Transceiver
- Freq range: Sub 1-GHz
- Modulation Tech: FSK, OOK
Specification:
VS (Min): 2.1V
VS (Max): 3.6V
Datarate (Max): 76.8kbps
ISB: 0.2µA
Flash: 1KB
PA Efficiency: n/a
Prog Output Power: -20 to 10dBm
RAM: 0KB
IRX (Low): 7.4mA
Sensitivity(Best): -110dBm
TX Power(Max): 10dBm
Wake PD-->RX/TX: n/a
VS (Max): 3.6V
Datarate (Max): 76.8kbps
ISB: 0.2µA
Flash: 1KB
PA Efficiency: n/a
Prog Output Power: -20 to 10dBm
RAM: 0KB
IRX (Low): 7.4mA
Sensitivity(Best): -110dBm
TX Power(Max): 10dBm
Wake PD-->RX/TX: n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
