Bare Die Product Detail: CC1101

6LoWPAN Wireless IC:
Low-Power Sub-1GHz RF Transceiver

Features:

WAKE-ON-RADIO: Yes
AES 128bit hardware encryption: No
Frequency(Min): 300MHz, 391MHz, 782MHzMHz
Frequency(Max): 348MHz, 464MHz, 928MHzMHz
Bluetooth Low Energy: No
WIRELESSHART: No
WIRELESS M-BUS: Yes
ZIGBEE: No
ZigBee RF4CE: No
6LoWPAN: Yes
KNX-RF: Yes
SP100: No
SIMPLICITI: Yes
USB 20: No
IEEE 802154 Compliant: No
Complies with EN 300 220 and FCC CFR 47 Part 15: Yes

Vendor:
Texas Instruments
Electrical Datasheet

Die Physical Data:
Footprint: 3.200mm² (4960mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Functional:

Type: Smart RF Transceiver
Freq range: Sub 1-GHz
Modulation Tech: 2-FSK, 4-FSK, GFSK, MSK, OOK, ASK

Specification:

V_{S (Min)}: 1.8V
V_{S (Max)}: 3.6V
Datarate _(Max): 500kbps
I_SB: 0.2µA
I_{RX (Low)}: 14mA
Sensitivity(Best): -116dBm
TX Power_(Max): 12dBm
Wake PD-->RX/TX: 240µs

Functional:

Type: Smart RF Transceiver
Freq range: Sub 1-GHz
Modulation Tech: 2-FSK, 4-FSK, GFSK, MSK, OOK, ASK

Specification:

V_{S (Min)}: 1.8V
V_{S (Max)}: 3.6V
Datarate _(Max): 500.0kbps
I_SB: 0.2µA
Flash: 1KB
PA Efficiency: n/a
Prog Output Power: -dBm
RAM: 0KB
I_{RX (Low)}: 14.0mA
Sensitivity(Best): -116dBm
TX Power_(Max): 12dBm
Wake PD-->RX/TX: 240µs

Functional:

Type: Smart RF Transceiver
GPIO: n/a
Freq range: Sub 1-GHz
I2C: 1
I2S: 1
Modulation Tech: 2-FSK, 4-FSK, GFSK, MSK, OOK, ASK
SPI: 1
TMR 16-bit: 1
TMR 8-bit: 1
UART: 1

Specification:

V_{S (Min)}: 1.8V
V_{S (Max)}: 3.6V
Datarate _(Max): 500.0kbps
I_SB: 0.2µA
ADC: Flash: 1KB
RAM: 0KB
I_{RX (Low)}: 14.0mA
Sensitivity(Best): -116dBm
TX Power_(Max): 12dBm

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.