Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: AM1323P

Power MOSFET:
P-Channel 20V (D-S), 1.2A MOSFET bare die
The AM1323P uses a high density trench fab process to reduce RDS(on), losses & heat dissipation. Die form factor offers scope for increased integration, operational temperature & power density in customized Hi-Rel or Module applications.
Features:
  • Passivated for ease of handlng, improved yields & mechanical ruggedness
  • Low RDS(on) trench technology
  • Low thermal impedance
  • Fast switching speed
  • Typical Applications: Load Switches, DC/DC Conversion, Motor Drives
  • Lower VGS test points available on request
  • Long term product availability with low obsolescence potential
Vendor:
Analog Power
  Electrical Datasheet

Die Physical Data:
Footprint: 0.567mm² (879.439mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Channel: P
  • ESD Diode: No
Specification:
VDS: -20V
VGS: 8
VGS(th)min: -0.40V
RDS(on)max@ 4.5V: 150.0
RDS(on)max@ 10V:   n/a
Qg: 3.7nC
ID: -1.3A
IDM: -5A
ID 70°C: -1.00A
RDS(on)@ 1.8V:   n/a
RDS(on)@ 2.5V:   n/a
RDS(on)@ 4.5V:   n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74HC04:
Hex Inverters
CD74HC00:
High Speed CMOS Logic Quad 2-Input NAND Gates
SN74LS174:
Hex D-Type Flip-Flops With Clear
CD74ACT138:
3-Line to 8-Line Inverting Decoders/Demultiplexers
EA2M:
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
NTC020N120SC1:
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.