Back to List

Bare Die Product Detail: CD4016B

Digital Signal Switch:
The CD4016B quad bilateral switch consists of four independent switches capable of controlling either digital or analog signals for us in signal gating, chopper, modulator, demodulator and CMOS logic implementations.

*** END OF LIFE *** Replacement die options can be obtained by contacting engineering.

Features:

Diode protection on all inputs
Linear transfer characteristics
Low Noise - 12 nV/√Cycle, f = 1.0 kHz typical
High Input Voltage up to 20V
Military Temperature Range for High Reliability

Applications:

Analog signal switching/multiplexing
Signal gating
Squelch control
Chopper
Modulator/Demodulator
Commutating switch
Digital signal switching/multiplexing
CMOS logic implementation
Analog-to-digital/digital-to-analog conversion
Digital control of frequency, impedance, phase, and analog-signal gain

Vendor:
SiS OBSOLETE
Electrical Datasheet

Die Physical Data:
Footprint: 2.163mm² (3352.967mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Functional:

Channels: 4
Config: 1:1 SPST

Specification:

V_{CC (Min)}: 3.00V
V_{CC (Max)}: 18.00V
R_ON: 280.0Ω
R_{ON (Max)}: 400.0Ω
BW _(Max): 40MHz
V_{IO (Min)}: -0.50V
V_{IO (Max)}: 18.50V
I_{IO (Cont)}: 10mA
I_{CC (Max)} @ V_NOM: 30µA

Functional:

Switch Type: SPST
Channels: 4

Specification:

R_ON: 280.00Ω
BW _(Max): 40MHz
V_{CC (Min)}: 3.00V
V_{CC (Max)}: 18.00V
I_{O (CONT)}: 10A
Output Drive _(Max): n/a
I_{CC (Max)}: 1.00µA
I_{CC (Max)} @ V_NOM: 30.00mA

Functional:

Switch Type: SPST
Channels: 4
3-State O/P: No

Specification:

R_ON: 280Ω
R_{ON (Max)}: 400Ω
BW _(Max): 40MHz
V_{CC (Min)}: 3.00V
V_{CC (Max)}: 18.00V
I_{O (CONT)}: 10A
I_{CC (Max)}: 1µA
I_{CC (Max)} @ V_NOM: 30.0mA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.