Features:
- Features: SPST switch, low tpd, unbuffered
- Mux Configuration: 1:1 SPST
- Bits(#): 1
- Gate Type: ANALOG SWITCH
- Technology Family: LVC
- F @ Nom Voltage(Max): 150MHz
- ICC @ Nom Voltage(Max): 0.01mA
- Output Drive (IOL/IOH) (Max) : 32/-32mA
- tpd @ Nom Voltage(Max): 2, 1.2, 0.8, 0.6ns
- Voltage(Nom) : 1.8, 2.5, 3.3, 5V
- Schmitt Trigger: No
- 3-State Output: No
- Logic: True
Vendor:
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 0.339mm² (525mil²)
Request Pad Layout
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 0.339mm² (525mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Channels: 1
- Config: 1:1 SPST
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
BW (Max): n/a
ICC (Max) @ VNOM: 10.00µA
RON (Max): 15.0Ω
RON: 7.50Ω
VIO (Min): n/a
VIO (Max): n/a
IIO (Cont): 50mA
VCC (Max): 5.50V
BW (Max): n/a
ICC (Max) @ VNOM: 10.00µA
RON (Max): 15.0Ω
RON: 7.50Ω
VIO (Min): n/a
VIO (Max): n/a
IIO (Cont): 50mA
Functional:
- Channels: 1
- Switch Type: SPST
Specification:
VCC (Min): 1.65V
VCC (Max): 5.50V
ICC (Max): n/a
BW (Max): 150MHz
ICC (Max) @ VNOM: 0.01mA
Output Drive (Max): 32mA
RON: n/a
IO (CONT): n/a
VCC (Max): 5.50V
ICC (Max): n/a
BW (Max): 150MHz
ICC (Max) @ VNOM: 0.01mA
Output Drive (Max): 32mA
RON: n/a
IO (CONT): n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
