Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: SN74LV4066A

Analog Signal Switch:
Quadruple Bilateral Analog Switch
Features:
  • Crosstalk :  -45dB
  • HBM ESD:  2kV
  • ESD Charged Device Model :  1kV
  • OFF-state leakage current (Max) :  1µA
  • Features:  Low Crosstalk, Low Power
  • Technology Family:  LV-A
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 0.929mm² (1440mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Channels: 4
  • Config: 1:1 SPST
Specification:
VCC (Min): 2.00V
VCC (Max): 5.50V
BW (Max): 50MHz
ICC (Max) @ VNOM: 35.00µA
RON (Max): 75.0Ω
RON: 21.00Ω
VIO (Min): 0.00V
VIO (Max): 5.50V
IIO (Cont): 28mA
Functional:
  • Channels: 4
  • Switch Type: SPST
Specification:
VCC (Min): 2.00V
VCC (Max): 5.50V
ICC (Max):   n/a
BW (Max): 50MHz
ICC (Max) @ VNOM:   n/a
RON: 21.00Ω
IO (CONT):   n/a
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74LS74A:
Dual D-type pos.-edge-triggered flip-flops with preset and clear
SN74LS174:
Hex D-Type Flip-Flops With Clear
CD74HC74:
High Speed CMOS Logic Dual Positive-Edge-Triggered D-Type Flip-Flops with Set and Reset
UA7805:
3 Pin 1.5A Fixed 5V Positive Voltage Regulator
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.