Features:
- Features: Low Power, Low Crosstalk, Break-before-make
- Switch Configuration: SPDT
Vendor:
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 2.023mm² (3135mil²)
Request Pad Layout
Texas Instruments
Electrical Datasheet
Die Physical Data:
Footprint: 2.023mm² (3135mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Bits: 2
- Channels: 3
- Schmitt Trigger: No
- Config: 1:2
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
BW (Max): 200MHz
ICC (Max) @ VNOM: n/a
RON (Max): 130Ω
RON: 45Ω
VCC (Max): 6.00V
BW (Max): 200MHz
ICC (Max) @ VNOM: n/a
RON (Max): 130Ω
RON: 45Ω
Functional:
- Bits: 2
- Channels: 3
- I/P Level: CMOS/LVTTL
- O/P Level: CMOS
- Config: 1:2
Specification:
VCC (Min): 2.00V
VCC (Max): 6.00V
BW (Max): 200MHz
ICC (Max) @ VNOM: n/a
VNOM (Max): 5.0V
RON: 45Ω
VCC (Max): 6.00V
BW (Max): 200MHz
ICC (Max) @ VNOM: n/a
VNOM (Max): 5.0V
RON: 45Ω
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
