Back to List

Bare Die Product Detail: LM3480-5

Regulator output <= 300mA:
The LM3480 5-Volt positive regulator is a smaller & electrically upgraded 78L05 replacement with 30V input voltage & lower drop-out voltage. The device suits use as a post-regulator in switching DC/DC converters or as bias supply in analog circuits.

This device suits hybrid & MCM designers needing small form factor, high reliability & fixed 5V positive voltage regulation. This bare die is a functional equivalent / replacement for the National or Texas Instruments (TI) LM3480-5.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Wide input Voltage Range: up to 30V
Guaranteed 100mA output current
1.2V Max dropout over full load & temperature range
Very small form factor
Military Temperature Range for High Reliability

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 1.045mm² (1619.05mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Regulator output <= 300mA

Functional:

Output: Fixed Output
Output Capacitor: Ceramic

Specification:

V_{IN (MIN)}: 4.00V
V_{IN (MAX)}: 30.00V
I_{OUT (MAX)}: 0.10A
V_{OUT (MIN)}: 4.80V
V_{OUT (MAX)}: 5.20V
V_DO: 900mV
Accuracy: 4.0%
I_Q: 3.0000mA
Noise Figure: 100µVrms
PSRR @ 100KHz: 45dB

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.