Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: 79L05 REV 2

Regulator output <= 300mA:
The 79L05 is a 5V fixed 3-terminal negative voltage regulator delivering up to 100mA of output current and equipped with internal limiting + thermal shutdown features for overload immunity.
This device suits hybrid & MCM designers needing high reliability with fixed -5V negative voltage regulation. This bare die can replace National (TI) LM79L05, UA79L05 (TI) & Motorola (MOT) or ON Semi MC79L05, MCC79L05.
Features:
  • Stocked for long term support
  • 5% voltage output tolerance
  • Wide input voltage range
  • Internal Short-Circuit Current Limiting
  • Internal Thermal Overload Protection
  • No external components required
  • Military Temperature Range for High Reliability
  • Provides Point-of-Source regulation with lower noise
  • x2 magnitude impedance improvement with lower bias current and noise when replacing Zener diode/resistor combinations
  • Can be used with power-pass elements to make high-current voltage regulators
Vendor:
Silicon Supplies
  Electrical Datasheet

Die Physical Data:
Footprint: 0.940mm² (1457.005mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Output: Fixed Output, Negative Output
  • Output Capacitor: Cap Free, Non-Ceramic
Specification:
VIN (MIN): -7.00V
VIN (MAX): -20.00V
IOUT (MAX): 0.10A
VOUT (MIN): -4.60V
VOUT (MAX): -5.40V
VDO: 1,700mV
Accuracy: 4.0%
IQ: 3.5000mA
Noise Figure: 40µVrms
PSRR @ 100KHz: 40dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

OPA541:
High Power Monolithic Operational Amplifier
SN74HC32:
Quadruple 2-Input Positive-OR Gates
SN74LS86A:
Quad 2-input exclusive-OR gates
UC2834:
High Efficiency Linear Regulator
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.