This bare die suits hybrid & MCM designs needing high output current, adjustable regulation & smallest size. Other than lower input voltage range, the part is functionally equivalent to the industry LM1085 or LT1085 with ~40% footprint reduction.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- 1.5V dropout voltage guaranteed at maximum output current
- Optimized for small die size
- Internal Short-Circuit Current Limiting
- Internal Thermal Overload Protection
- x2 resistors needed to set output voltage
- Line Regulation 0.015% (typical)
- Load Regulation 0.1% (typical)
- Military Temperature Range for High Reliability
Applications:
- High efficiency linear regulators
- Battery chargers
- Post-regulation for switching supplies
- Constant-current regulator
- Microprocessor supply
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 2.200mm² (3409.387mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 2.200mm² (3409.387mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Output: Adjustable Output
- Output Capacitor: Ceramic
Specification:
VIN (MIN): 2.60V
VIN (MAX): 7.00V
IOUT (MAX): 3.50A
VOUT (MIN): 1.25V
VOUT (MAX): 7.00V
VDO: 1,300mV
Accuracy: 1.50%
IQ: 5.000mA
Noise Figure: 38.0µVrms
PSRR @ 100KHz: 30dB
VIN (MAX): 7.00V
IOUT (MAX): 3.50A
VOUT (MIN): 1.25V
VOUT (MAX): 7.00V
VDO: 1,300mV
Accuracy: 1.50%
IQ: 5.000mA
Noise Figure: 38.0µVrms
PSRR @ 100KHz: 30dB
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
