Back to List

Bare Die Product Detail: LM2940-15

Regulator output > 300mA:
The LM2940-15V positive voltage regulator sources 1A output current with a typical dropout voltage of 0.5V & max 1V over the military temperature range. Quiescent current is lowered by design to 30mA at 1A output current & I/O differential of 5V.

This device is designed to operate over the full military temperature range & is well suited for high reliability applications. The device directly replaces the legacy National LM2940-15 MD8 or MW8, LM2940CT-15 MDC or MWC & LM2940C-15 MDC or MWC.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Wide input voltage range
500mV Typical Dropout Voltage at 1A
Output Current in Excess of 1A
Optimised for Low Quiescent Current Consumption
Reversed-Battery Protection
Current Limit and Thermal Shutdown.
Military Temperature range for high reliability

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 3.445mm² (5340.077mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Regulator output > 300mA

Functional:

Output: Fixed Output
Output Capacitor: Ceramic

Specification:

V_{IN (MIN)}: 6.00V
V_{IN (MAX)}: 26.00V
I_{OUT (MAX)}: 1.00A
V_{OUT (MIN)}: 14.55V
V_{OUT (MAX)}: 15.45V
V_DO: 500mV
Accuracy: 3.00%
I_Q: 10.000mA
Noise Figure: 450.0µVrms
PSRR @ 100KHz: 52dB

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.