Using latch immune CMOS technology, this rugged IC accepts CMOS or TTL input down to 3.3V logic and can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates from 10 to 600 volts.
Features:
- Floating gate driver designed for bootstrap operation
- Fully operational to +600 V
- Tolerant to negative transient voltage, dV/dt immune
- Gate drive supply range from 10V to 20V
- Undervoltage lockout
- 3.3V, 5V and 15V logic input compatible
- Cross-conduction prevention logic
- Matched propagation delay for both channels
- Internal set deadtime
- High-side output in phase with input
- Shutdown input turns off both channels.
Applications:
- General purpose motor drive - variating frequency and voltage
- Motor Control
- Power Conversion
Vendor:
International Rectifier
Electrical Datasheet
Die Physical Data:
Footprint: 3.435mm² (5325mil²)
Request Pad Layout
International Rectifier
Electrical Datasheet
Die Physical Data:
Footprint: 3.435mm² (5325mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Channels: 2
- Switch Type: MOSFET, IGBT
- Input Threshold: CMOS, TTL
- Ch I/P Logic: CMOS, TTL
Specification:
Bus Voltage: 20V
IO (PEAK): 0.6A
VCC (Min): 10.0V
VCC (Max): 20.0V
VB: 600V
tr: 70ns
tf: 35ns
tpd: 150ns
IQ: 150µA
V- @ HS Pin: 0.3V
IO (PEAK): 0.6A
VCC (Min): 10.0V
VCC (Max): 20.0V
VB: 600V
tr: 70ns
tf: 35ns
tpd: 150ns
IQ: 150µA
V- @ HS Pin: 0.3V
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
