Back to List

Bare Die Product Detail: SiS17601

Dual MOSFET Driver:
The SiS17601 dual high-speed MOSFET driver sinks /sources up to 4A & finds use in high-frequency circuits due to fast switching time & low propagation delay. Each channel is controlled via non-inverting TTL logic input & enable pins.

This device benefits from low input capacitance and drives capacitive load with high speed. Bare die form suits implementation in magnetic environments and in high integration / small size applications.

Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN

Wide single-supply voltage range +4V to +14V
Input voltage spike protection up to +14V
Up to 4A peak output current (Sink/Source)
High speed 5ns/5ns t_r/t_f at 1nF load
Propagation delays matched between channels
Low Input Capacitance: 10pF (typ)
Thermal Shutdown
Committed long term support with no die mask changes.

Applications:

Power-Supply Modules
SMPS Power Supplies
DC-DC Conversion
Motor Control

Vendor:
Silicon Supplies
Electrical Datasheet

Die Physical Data:
Footprint: 4.430mm² (6867.141mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Dual MOSFET Driver

Functional:

Type: High / Low Side
I/P Level: TTL
Config: Non-inverting

Specification:

V_{S (Min)}: 4V
V_{S (Max)}: 14.00V
I_{O (PEAK)}: 4A
t_r: 5ns
t_f: 5ns
t_pd: 10ns

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.