Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: TPS60503

Step-Down Charge Pump:
250-mA, 1.5-V High-Efficiency Step-Down Charge Pump
Features:
  • Features:  Dynamic Voltage Scaling
  • Market Segment:  Consumer & Portable Electronics
Vendor:
Texas Instruments
  Electrical Datasheet

Die Physical Data:
Footprint: 3.058mm² (4740mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
  • Regulated Outputs: 1
Specification:
f(MAX): 1,200kHz
Frequency (MAX): 600kHz
IQ: 0.04mA
VIN (MIN): 2.5V
VIN (MAX): 6.5V
VOUT (MAX): 1.5V
VOUT (MIN): 1.5V
Efficiency: 90%
IOUT (MAX): 0.25A
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

SN74LS11:
Triple 3-input positive-AND gates
SN74HC86:
Quadruple 2-Input Exclusive-OR Gates
SN74LS123:
Dual retriggerable monostable multivibrators
SN74HC138:
3-Line To 8-Line Decoders/Demultiplexers
INN650N080BS:
650 Volt 29 Amp 60mOhm Gallium Nitride (GaN) MOSFET. Metalized with Aluminum on topside for wirebonding.
AMS1200013B3:
1200 Volt 13mOhm Silicon Carbide (SiC) MOSFET with customizable top metal back metals optimized for wire-bonding or sintering.