This CMOS voltage converter bare die suits hybrid & MCM design requirements for high reliability, high integration & stability at temperature. The part is a direct replacement for Intersil ICL7660 or Maxim MAX7660.
Features:
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
** END OF LIFE ** NOT RECOMMENDED FOR NEW DESIGN
- Latch-up free via internal logic bias sense
- Typical open-circuit voltage conversion efficiency 99.9%
- Typical power efficiency 98%
- Wide operating voltage range 1.5V to 10.0V
- Simple voltage multiplication (VOUT = (-) nVIN)
- No external diode required over full temperature and voltage range
- Simple operation requires only x2 external capacitors
- Full military temperature range
Applications:
- Conversion of +5V Logic Supply to -5V
- Data acquisition systems
- Op-Amp power supplies
Vendor:
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 3.237mm² (5018.141mil²)
Request Pad Layout
Silicon Supplies
Electrical Datasheet
Die Physical Data:
Footprint: 3.237mm² (5018.141mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- Topology: Inverting Buck-Boost
Specification:
VIN (MIN): 1.5V
VIN (MAX): 10.0V
VOUT (MIN): -1.5V
VOUT (MAX): -10.00V
IOUT (MAX): 0.02A
Frequency (MAX): 8kHz
f(MAX): 18kHz
IQ: 0.170mA
Efficiency: 98%
VIN (MAX): 10.0V
VOUT (MIN): -1.5V
VOUT (MAX): -10.00V
IOUT (MAX): 0.02A
Frequency (MAX): 8kHz
f(MAX): 18kHz
IQ: 0.170mA
Efficiency: 98%
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
