Innovate > Integrate > Empower - Design at Die Level

  Back to List

Bare Die Product Detail: SFM8250ABCANHWS

Single Value 1Ω - 999Ω:
The SFM8250ABCANHWS is a 825Ω, 0.1% tolerance, ±50 ppm/°C TCR wirebondable chip resistor suited for use in hybrid circuits & multi-chip-modules (MCM). The device is 100% electrically tested & visually inspected to MIL-STD-883/TM2032.
This 825 Ohm high precision low temperature coefficient chip resistor features aluminum metalized bond pads for wire bond flexibility.
  • Noise, MIL-STD-202\TM308:   -35dB typ.
  • Moisture resistance, MIL-STD-202\TM106:   ± 0.5% max.△R/R
  • Stability, 1000 h, +125°C, 125 mW:   ± 0.25% max.△R/R
  • Operating temperature range:   -55°C to +150°C
  • Thermal shock, MIL-STD-202\TM107F:   ± 0.25% max.△R/R
  • High temperature exposure, +150°C, 100h:   ± 0.5% max.△R/R
  • Dielectric voltage breakdown:   200V
  • Insulation resistance:   1012Ω min.
  • Operating Voltage:   100V max.
  • DC power rating at +70°C (derated to zero at +175°C):   0.250W
  • 5x rated power short-time overload, +25°C, 5s:   ± 0.25% max.△R/R
  Electrical Datasheet

Die Physical Data:
Footprint: 0.258mm² (400.000mil²)
  Request Pad Layout
Product Families: Used for this device are tabulated below.
  • Pad Metal: Al
  • Back Metal: None
  • Supply Format: Waffle Pack
Resistance: 825.000Ω
Tolerance: 0.1%
Temp. Coefficient: ±50ppm/°C
Visual Grade:
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
  • Green:Available from stock or at low factory MOQ.
  • Amber: Available on factory order with MOQ.
  • Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
  • Green: This bare die is specified and tested for use in high reliability applications.
  • Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
  • Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
  • Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
  • Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
  • Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.

Other Featured Products:

Dual Low-Power JFET-Input General-Purpose Operational Amplifier
CMOS Quad 2-Input NOR Gate
CMOS Programmable Timer
Micropower Integrated Precision Voltage Reference
ON Semi Serial 2-Mb SPI Ultra Low-Power EEPROM with ECC for high reliability portable or battery applications.
ON Semi 1200 Volt 20mOhm 103A Silicon Carbide MOSFET specified at >=175°C maximum junction temperature.