Supporting ultra-low voltage 1.2V Flash operation, this bare die is peripherally equipped for a wide range of general purpose battery driven applications. It's small-scale and flexible interfacing provide ease of implementation.
Features:
- LCD Driver:
- 80 SEG × 1–16 COM (max.)
- 64 SEG × 17–32 COM (max.)
- 384kB Flash, 16kB RAM, 640B Display RAM
- x4 clock generation sources
- x53 GPIO
- x4 16-Bit Timers, x3 16-Bit PWM Timers, Watchdog Timer, RTC
- Supply-Voltage detector
- Multiple serial interfaces: x2 UART, x2 SPIA, x1 I2C
- Sound generator
- IR remote controller
- 12-Bit SAR ADC
- Temperature sensor / Reference Voltage generator
- RF converter
- Multiplier / Divider
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode: 0.15µA (IOSC = OFF, OSC1 = OFF, OSC3 = OFF)
- HALT Mode:
- 0.6µA (OSC1 = 32 kHz, RTC = ON)
- 0.4µA (OSC1 = 32 kHz, RTC = ON, super economy mode)
- 5.4 µA (OSC1 = 32 kHz, RTC = ON, LCD = ON (no panel load, 1/5 bias), super economy mode)
- RUN Mode:
- 6µA, (OSC1 = 32 kHz, RTC = ON, CPU = OSC1)
- 3µA (OSC1 = 32 kHz, RTC = ON, CPU = OSC1, super economy mode)
- 150µA (OSC3 = 1 MHz (ceramic oscillator), OSC1 = 32 kHz, RTC = ON, CPU = OSC3)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 16.728mm² (25928.452mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 16.728mm² (25928.452mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: 1
- SPI: 2
- UART: 2
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: 4
- TMR 32-bit: n/a
- GPIO: 53
Specification:
LCD Seg.: 2,048
ADC: f(MAX): 4.2MHz
NVM: 384KB
RAM: 16KB
VCC (Min): 1.2V
VCC (Max): 3.6V
Active Power: 150µA/MHz
S/B Pwr (LPM/HALT): 0.40µA
Sleep Pwr: 0.15µA
ADC: f(MAX): 4.2MHz
NVM: 384KB
RAM: 16KB
VCC (Min): 1.2V
VCC (Max): 3.6V
Active Power: 150µA/MHz
S/B Pwr (LPM/HALT): 0.40µA
Sleep Pwr: 0.15µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
