This bare die suits use in seven-segment control panel integration for domestic or industrial equipment. It's power efficiency, small-scale and flexible interfacing provide ease of implementation.
Features:
- LCD Driver:
- 8SEG × 1–5COM (max.)
- 16kB Flash, 2kB RAM
- x3 clock generation sources
- x39 GPIO
- x4 16-Bit Timers, Watchdog Timer, x1 16-Bit PWM Timer
- Supply-Voltage detector
- Multiple serial interfaces: x4 UART, x2 SPIA, x1 I2C
- IR remote controller
- Multiplier / Divider
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode:
- 0.3µA (VDD = 3.6V, IOSC = OFF, OSC3 = OFF)
- 0.35µA (VDD = 5,5V, IOSC = OFF, OSC3 = OFF)
- HALT Mode:
- 340µA (OSC3 = 16 MHz (internal oscillator))
- RUN Mode:
- 1650µA (OSC3 = 16 MHz (internal oscillator), CPU = OSC3 (2 wait cycles)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 5.198mm² (7067.938mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 5.198mm² (7067.938mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: 1
- SPI: 2
- UART: 1
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: 4
- TMR 32-bit: n/a
- GPIO: 39
Specification:
LCD Seg.: n/a
ADC: f(MAX): 16.8MHz
NVM: 16KB
RAM: 2KB
VCC (Min): 1.8V
VCC (Max): 5.5V
Active Power: 150µA/MHz
S/B Pwr (LPM/HALT): 40.00µA
Sleep Pwr: 0.35µA
ADC: f(MAX): 16.8MHz
NVM: 16KB
RAM: 2KB
VCC (Min): 1.8V
VCC (Max): 5.5V
Active Power: 150µA/MHz
S/B Pwr (LPM/HALT): 40.00µA
Sleep Pwr: 0.35µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
