Back to List

Bare Die Product Detail: S1C17M01

Ultra-Low Power MCU+LCD Driver:
S1C17M01 low power 16-Bit MCU combines a magneto resistive (MR) sensor controller, LCD display driver + wireless communication interface to form an integrated flow measurement & output solution. An on-chip RF converter broadens application scope.

This bare die includes an LCD driver to display flow count & readout on the indicator. Synchronous serial interface, UART, & I2C interface wirelessly with a remote meter reading system. The RF detector allows measurement of additional sensory input.

Features:

LCD Driver:
- 32 SEG × 1 to 4 COM (max.)
- 28 SEG × 5 to 8 COM (max.)
32kB Flash, 4kB RAM, 32B Display RAM
x3 clock generation sources
x19 GPIO
x5 16-Bit Timers, Watchdog Timer, RTC
Supply-Voltage detector
Multiple serial interfaces: x1 UART, x2 SPIA, x1 I²C
RF converter
MR sensor controller
Multiple reset & interrupt protocols
Very small form factor capable of ultra-thin height profile

Power Consumption:

SLEEP Mode:
- 0.35µA (IOSC = OFF, OSC1 = OFF, V_DD = 3.6V)
HALT Mode:
- 0.8µA (IOSC = OFF, OSC1 = 32 kHz, RTC = ON, V_DD = 3.6V)
- 1.3µA (IOSC = OFF, OSC1 = 32 kHz, RTC = ON, CPU = OSC1, LCD = ON (no panel load, V_C2 reference)
RUN Mode:
- 12.5µA, (IOSC = OFF, OSC1 = 32 kHz, RTC = ON, CPU = OSC1, LCD = ON (no panel load, V_C2 reference)
- 2.5mA @ 1/1 divided clock (IOSC = ON, OSC1 = 32 kHz, RTC = ON, CPU = IOSC, LCD = OFF (no panel load)
- 500µA @ 1/8 divided clock (IOSC = ON, OSC1 = 32 kHz, RTC = ON, CPU = IOSC, LCD = OFF (no panel load)

Applications:

Low power & high integration display systems
Battery driven controllers
Wearable products
Remote Sensors
MCM, MCP and SiP integration

Vendor:
Epson
Electrical Datasheet

Die Physical Data:
Footprint: 6.912mm² (10714.235mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Ultra-Low Power MCU+LCD Driver

Functional:

I2C: 1
SPI: 2
UART: 1
DMA: -Ch
Comp Inputs: n/a
TMR 16-bit: 5
TMR 32-bit: n/a
GPIO: 19

Specification:

LCD Seg.: 224
ADC: f_(MAX): 16.3MHz
NVM: 32KB
RAM: 4KB
V_{CC (Min)}: 1.8V
V_{CC (Max)}: 5.5V
Active Power: 210µA/MHz
S/B Pwr (LPM/HALT): 0.80µA
Sleep Pwr: 0.35µA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.