This bare die suits use in battery driven and E-paper applications such as smartcard, watch and tags. It's power efficiency, small-scale and flexible interfacing provide ease of implementation.
Features:
- EPD controller/driver:
- Segment output: 64
- Top plane output: 2
- Back plane output: 2
- 32kB Flash, 2kB RAM
- x3 clock generation sources
- x29 GPIO
- x2 8-Bit Timers, x2 16-Bit PWM Timer, Watchdog Timer, Clock & Stopwatch timer, RTC, Theoretical Regulation Timer function
- Sound generator
- RF converter
- Temperature Sensor
- Supply-Voltage detector
- Multiple serial interfaces: x1 UART, x1 SPI, x1 I2C master, x1 I2C slave
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode:
- 0.1µA (OSC1 = Off, RTC = Off, OSC3B = Off, OSC3A = Off)
- HALT Mode:
- 0.55µA (OSC1 = 32 kHz (OSC1A), RTC = Off, OSC3B = Off, OSC3A = Off)
- 0.50µA (OSC1 = 32 kHz (OSC1A), RTC = On, OSC3B = Off, OSC3A = Off)
- RUN Mode:
- 12µ (OSC1 = 32 kHz (OSC1A), RTC = Off, OSC3B = Off, OSC3A = Off)
- 770µA (OSC1 = Off, RTC = Off, OSC3B = 2 MHz, OSC3A = Off)
- 1440µA (OSC1 = Off, RTC = Off, OSC3B = Off, OSC3A = 4 MHz ceramic)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 12.960mm² (20088.001mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 12.960mm² (20088.001mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: 1
- SPI: 1
- UART: 1
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: n/a
- TMR 32-bit: n/a
- GPIO: 29
Specification:
LCD Seg.: n/a
ADC: f(MAX): 4.2MHz
NVM: 32KB
RAM: 2KB
VCC (Min): 2.0V
VCC (Max): 3.6V
Active Power: 410µA/MHz
S/B Pwr (LPM/HALT): 0.55µA
Sleep Pwr: 0.10µA
ADC: f(MAX): 4.2MHz
NVM: 32KB
RAM: 2KB
VCC (Min): 2.0V
VCC (Max): 3.6V
Active Power: 410µA/MHz
S/B Pwr (LPM/HALT): 0.55µA
Sleep Pwr: 0.10µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
