Back to List

Bare Die Product Detail: S1C17711

Ultra-Low Power MCU+LCD Driver:
The S1C17711 is a low power 16-Bit Flash based MCU integrating multiple serial interfaces, timers and LCD driver. An integrated RF converter and 10-Bit ADC further broaden the application scope permitting multiple analog sensors to be connected.

This bare die is ideal for applications, such as remote controllers, health care products, and sports watches, that must be driven with battery power and require sensor interfaces and a high-definition LCD display.

Features:

LCD Driver:
- 56 SEG × 24 COM (1/4 bias)
- 64 SEG × 16 COM (1/4 bias)
- 64 SEG × 8 COM (1/4 bias)
64kB Flash, 4kB RAM, 384B display RAM
x3 clock generation sources
x29 GPIO
x4 16-Bit Timers, x4 16-Bit PWM Timers, Watchdog Timer, Clock Timer, Stopwatch timer
Supply-Voltage detector
Multiple serial interfaces: x1 UART, x1 SPI, x2 I²C
IR remote controller
10-Bit SAR ADC
RF converter
Multiple reset & interrupt protocols
Very small form factor capable of ultra-thin height profile

Power Consumption:

SLEEP Mode:
- 1µA (OSC1: Off, IOSC: Off, OSC3: Off)
HALT Mode:
- 2µA (OSC1: 32 kHz, IOSC: Off, OSC3: Off, PCLK: Off, LCD: Off)
- 9µA (OSC1: 32 kHz, IOSC: Off, OSC3: Off, PCLK: Off, LCD On (all on, maximum contrast, VC2 reference))
RUN Mode:
- 12µA (OSC1: 32 kHz, IOSC: Off, OSC3: Off, PCLK: On, LCD: Off)
- 400µA (OSC1: Off, IOSC: Off, OSC3: 1 MHz ceramic, PCLK: On, LCD: On (all on, maximum contrast, VC2 reference voltage))

Applications:

Low power & high integration display systems
Battery driven controllers
Wearable products
Remote Sensors
MCM, MCP and SiP integration

Vendor:
Epson
Electrical Datasheet

Die Physical Data:
Footprint: 14.946mm² (23165.881mil²)
Request Pad Layout

Product Families: Used for this device are tabulated below.

Ultra-Low Power MCU+LCD Driver

Functional:

I2C: 1
SPI: 1
UART: 1
DMA: -Ch
Comp Inputs: n/a
TMR 16-bit: 4
TMR 32-bit: n/a
GPIO: 29

Specification:

LCD Seg.: 1,344
ADC: f_(MAX): 8.2MHz
NVM: 64KB
RAM: 4KB
V_{CC (Min)}: 1.8V
V_{CC (Max)}: 3.6V
Active Power: 400µA/MHz
S/B Pwr (LPM/HALT): 2.00µA
Sleep Pwr: 1.00µA

Other Detail: Important information for this device is tabulated below.

Traffic light setting for Minimum Order Quantity indicates the following:

Green:Available from stock or at low factory MOQ.
Amber: Available on factory order with MOQ.
Red: High factory MOQ may apply, please ask for details.

Traffic light setting for High Reliability indicates the following:

Green: This bare die is specified and tested for use in high reliability applications.
Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
Red: This bare die is not specified or specifically designed for use in high reliability applications.

Traffic light setting for Space Grade indicates the following:

Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.