This bare die suits use in battery-driven applications such as smartcard, read type eTokens and remote control units with a high-definition LCD display. It's power efficiency, small-scale and flexible interfacing provide ease of implementation.
Features:
- LCD Driver:
- Segment output: 32 pins
- Common output: 4 pins
- 24kB Flash, 2kB RAM
- x2 clock generation sources
- x20 GPIO
- x1 8-Bit Timer, x1 16-Bit PWM Timer, Watchdog Timer, Clock Timer, RTC
- Supply-Voltage detector
- Multiple serial interfaces: x1 UART, x1 SPI
- Sound generator
- RF converter
- Multiple reset & interrupt protocols
- Very small form factor capable of ultra-thin height profile
Power Consumption:
- SLEEP Mode:
- 0.13µA (OSC1A = Off, RTC = Off, OSC3B = Off)
- 0.4µA (OSC1A = 32 kHz, RTC = On, OSC3B = Off)
- HALT Mode:
- 0.5µA (OSC1A = 32 kHz, RTC = Off, OSC3B = Off)
- 0.5µA (OSC1A = 32 kHz, RTC = On, OSC3B = Off)
- RUN Mode:
- 7.3µA (OSC1A = 32 kHz, RTC = Off, OSC3B = Off)
- 280µA (OSC1A = Off, RTC = Off, OSC3B = 1 MHz)
Applications:
- Low power & high integration display systems
- Battery driven controllers
- Wearable products
- Remote Sensors
- MCM, MCP and SiP integration
Vendor:
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 3.804mm² (5896.212mil²)
Request Pad Layout
Epson
Electrical Datasheet
Die Physical Data:
Footprint: 3.804mm² (5896.212mil²)
Request Pad Layout
Product Families: Used for this device are tabulated below.
Functional:
- I2C: n/a
- SPI: 1
- UART: 1
- DMA: -Ch
- Comp Inputs: n/a
- TMR 16-bit: n/a
- TMR 32-bit: n/a
- GPIO: 20
Specification:
LCD Seg.: 128
ADC: f(MAX): 4.0MHz
NVM: 24KB
RAM: 2KB
VCC (Min): 1.8V
VCC (Max): 3.6V
Active Power: 280µA/MHz
S/B Pwr (LPM/HALT): 0.50µA
Sleep Pwr: 0.13µA
ADC: f(MAX): 4.0MHz
NVM: 24KB
RAM: 2KB
VCC (Min): 1.8V
VCC (Max): 3.6V
Active Power: 280µA/MHz
S/B Pwr (LPM/HALT): 0.50µA
Sleep Pwr: 0.13µA
Other Detail: Important information for this device is tabulated below.
Traffic light setting for Minimum Order Quantity indicates the following:
- Green:Available from stock or at low factory MOQ.
- Amber: Available on factory order with MOQ.
- Red: High factory MOQ may apply, please ask for details.
Traffic light setting for High Reliability indicates the following:
- Green: This bare die is specified and tested for use in high reliability applications.
- Amber: This bare die can meet higher reliability specifications with additional testing & qualification, please ask for details.
- Red: This bare die is not specified or specifically designed for use in high reliability applications.
Traffic light setting for Space Grade indicates the following:
- Green: This bare die is qualified for space applications or has space level qualification data, please ask for details.
- Amber: This bare die can be specified for space applications with additional testing and qualification, please ask for details.
- Red: Suitability of this bare die for space applications is unknown and requires further qualification, please ask for details.
